Product Description

The subject facility should be conceptualized so that the combustion of wood residues release available thermal energy in the form of hot water in order to fulfill the set of energy and temperature regimes of technological consumers exploitation, under optimal technical, and statutory environmental requirements.

The available wood residues, used as energy fuel, are stored in the floor depot of *6m3 working volume, which is sufficient for *6 working hours of thermal power plants at consumers' nominal load of cca ***0 kW.Fuel is transported by the floor extractor and the worm gear conveyor to the dosing container, and from it to the hot water boilers adiabatic swirling furnace by dosing worm gear conveyor and flow of primary air. After entering the furnace, initiated by the accumulated heat and the temperature of fireclays walling up to **0/***0oC, comes to self-ignition of fuel. The end goal of fuel burning process are flue gases temperature up to ***0/***0oC which produce hot water by passing through the boilers heating surfaces, and when they get cold being drain into the atmosphere by the exhaust ventilator through the flue gas over the chimney. Separation of ash is done within cyclone filter as a part of the flue gas tract, and the same being c